[Daily Build] Viking 1.0.31a version ready

Releases
1

Ready to download the daily build 1.0.31a of Viking:
https://www.starkeeper.it/viking/Viking_Setup_1.0.31a.zip

NEW => UPowerBox 2 Unity REST API → Added AutoDew management with selection of automation type and aggressiveness level

NEW => UPowerBox 2 Unity REST API → Added possibility to set the output voltage of the ADJ OUT (WARNING !!! be careful not to set values that are not compatible with the connected device and damage it)

NEW => Pocket Powerbox ADVANCE Unity REST API → Added AutoDew selection of aggressiveness level

NEW => Pocket Powerbox ADVANCE Unity REST API → Added possibility to set the output voltage of the ADJ OUT (WARNING !!! be careful not to set values that are not compatible with the connected device and damage it)

NEW => Pocket Powerbox MICRO Unity REST API → Added AutoDew selection of aggressiveness level

NEW => Pocket Powerbox MICRO Unity REST API → Added possibility to set the output voltage of the ADJ OUT (ATTENTION !!! be careful not to set values that are not compatible with the connected device and damage it)

Our company will be not responsible for the damage you can provide to your devices using in a wrong mode the Vout Adj voltage set. We cannot stop you to use a wrong value in any way!

Many thanks to Dan for asking this Custom development of Viking.

Daily Build is declared potentially unstable … download the last official release version to rollback

All the best
Leonardo

2

This works perfectly and adds a lot of capability to the viking control of the Pegasus Ultimate Powerbox! For those who use this, the Viking control mapping to the Ultimate Powerbox is:

Relay 1 = 12V output 1
Relay 2 = 12V output 2
Relay 3 = 12V output 3
Relay 4 = 12V output 4
Relay 5 = USB port 1
Relay 6 = USB port 2
Relay 7 = USB port 3
Relay 8 = USB port 4
Relay 9 = USB port 5
Relay 10 = USB port 6
Relay 11 = Auto Dew ALL
Relay 12 = Auto Dew A
Relay 13 = Auto Dew B
Relay 14 = Auto Dew C
Relay 15 = Auto Dew A+B
Relay 16 = Auto Dew A+C
Relay 17 = Auto Dew B+C
PWM 1 = Dew heater A power
PWM 2 = Dew heater B power
PWM 3 = Dew heater C power
DAC 1 = Auto Dew Aggressiveness setting
DAC 2 = Adjustable Output Voltage ( 3 to 12V)

Thanks, Leo for the quick response on the custom development! Very reasonable cost and great added functionality! This is what makes Voyager so great! :slightly_smiling_face:

-Dan

1 Like
3

Hi Dan,

thanks to you for using the Custom development service.

All the best
Leonardo