Voyager and TheSkyX 64 bit

[Voyager]

[Daily Build] Voyager 2.3.1h version ready

Ready to download the daily build 2.3.1h of Voyager: http://www.starkeeper.it/voyager/Voyager_Setup_2.3.1h.zip NEW => TheSky64 → Added control management of the new 64-bit TheSkyX from Software Bisque NEW => TheSkyX / 64 → Added AO management in camera control NEW => FilePattern → Added $$SETTEMP$$ pattern (reports required temperature in sequence as two-digit unsigned integer) NEW => FilePattern → Added $$YY08$$ pattern (returns year with the same logic as the $$VOYDATEFOLDER08$$ pattern) …

[ScottC]

Thank you for this!!!

[backroadrider]

Awesome - thank you Leo! The new Daily Build (2.3.1h) is working fine with TSX 64bit - everything connects and everything controlled by TSX64 is functioning normally.

One thing to note for those of you making the switch from TSX 32bit to TSX 64bit: among the old settings from TSX32 that are lost is the Park Position! So be sure to set your desired Park Position in TSX 64 before you launch a session, otherwise Voyager will hang on a Park Command (TSX will throw a Park Position Undefined error). Don’t ask me how I know…

Steve

[Voyager]

To all … remember to check all the controls configurations in thesky64 and check it in Voyager using OnTheFly section before to start with unattended session. Voyager is not responsible for configurations lost in transition between 32 to 64bit version of TheSkyX.

Thanks to Steve and the others who have reported notes/tips.

All the best
Leonardo

[AstroMark]

Thank you Leonardo. You have saved my day (night actually).

Just switched to TSX64, and the timing of this is perfect.

All the best
Mark